SHARP AR-EB3
Manual de Servicio

AR-EB3

[5] LIMITATIONS
Function Limitations, When no page memory (SIMM) is additionally installed (16 MB), about 60 sheets of standard documents (ITUT chart #3 or #4, A4 size) can be read. (The number of documents to be read varies depending on image patterns.) When two or more documents are read and the image memory is full, the image data lamp lights up to stop the operation. In sort/group copy, if the number of discharged copy exceeds the following level, No. of discharged paper the machine stops copying: q Without the job separator: 250 sheets q With the job separator installed: 150 sheets When the reduction ratio of images exceeds 50%, the reduction ratio of 50% is active, resulting in broken images. For each reduction ratio, refer to the table below. 2 in 1/ 4 in 1 copy Even though rotation copy is canceled (by the user program), rotation copy may be made according to necessity. Unable to combine with the binding margin copy function. Unable to combine with the edge erase copy function. Unable to combine with 2 in 1/ 4 in 1 copy. Unable to change the binding position and the binding margin. Unable to combine with 2 in 1/ 4 in 1 copy. <When the operation is stopped with the memory full> To copy the read data: Start key To delete the read data: Clear All key

No. of documents to be read

Remove the discharged paper and press the START key to resume copying.

Binding margin copy

Edge erase copy

5�1