3) Remove the parts, and remove the paper exit roller (S07/Ua02/P02/CLN). � Clean with alcohol.
14) Remove the screw, and remove the ICU cover.
S07/Ua02/P03/GRE S07/Ua02/P04/CLN/GRE
15) Remove the ICU main PWB, the ICU image PWB, and the ICU scan PWB.
S07/Ua02/P02/CLN
� Apply grease to the gear (S07/Ua02/P03/GRE) and the inside
of the paper exit idle roller (S07/Ua02/P04/CLN/GRE).
S10 PWB
S10/P01 ICU main PWB S10/P02 ICU image PWB S10/P03 ICU scan PWB
(AR-C150/C250)
1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) Remove the original cover. S01/P01 Remove the rear cover upper. S01/P02 Remove the glass holder right. S01/P05 Remove the glass holder left. S01/P06 Remove the table glass. S01/P07 Remove the shading glass AS. S01/P08 Remove the operation unit. S02/Ua01 Remove the screw, and remove the dark box cover. Remove the screw, and remove the flat cable holder. Remove the flat cable from the CCD. Remove the screw, and remove the scanner fixing angle. Remove the screw, and remove the stopper. Open the scanner (reading) unit. Support it with the stopper.
