SHARP AR280
Manual de Servicio

AR-505 3) Slide the developing unit lock lever in the arrow direction to release lock. Hold the toner cartridge holder and slowly pull out the developing unit until it stops. 2) Supply developer from the developer supply port of the developing unit.

4) Hold the developing unit strap, slide the developing unit lock lever in the arrow direction again to release lock, and remove the developing unit.

3) Fix the toner hopper to the developing unit with the fixing screws (4 pcs.) and connect the 5P connector between the toner hopper and the developing unit. At that time, put the 5P connector harness in the harness clamp attached to the toner hopper, and process the harness.

(2) Supply developer.
1) Disconnect the 5P connector which connects the toner hopper and the developing unit. Then remove the toner hopper fixing screws (4 pcs.) of the developing unit.

illust.: AR-280

illust.: AR-280

8/6/1999

4�6