|
No hay comentarios de productos.
BYPASS FEED (special paper)
The bypass tray is used to copy onto transparency film, labels, and other special purpose papers. Up to 100 sheets of standard copy paper can be set in the bypass tray. For special purpose papers, the original image must be smaller than the paper or media for copying. If the original image is bigger than the paper or media, this may cause smudges on the edges of the copies. Also for standard copy paper, smudges may appear if the copy paper is not at least as large as the original image.
MAKING COPIES Bypass feed (special paper)
1
Unfold the bypass tray.
q
When feeding B4 or A3 sized paper, extend the bypass tray.
2
Set the paper guides to the copy paper width.
3
Insert the copy paper (print face down) all the way into the bypass tray.
q q q
q q
Up to 100 sheets of standard copy paper measuring from A6 to A3 can be loaded in the bypass tray. A6 size paper must be fed narrow side into the feed slot. Transparency film, labels, and other special purpose papers (except envelopes) must be fed individually. Up to 10 envelopes can be set. When adding paper, first remove remaining paper, combine it with the paper to be added and then reload as a single stack. When loading envelopes, make sure that they are straight and flat.
18
|
