5-5 Set up the Model option
g If you make the replacement of the ASS�Y CONTROL-IN or MAIN PCB , Be sure to be set up the model option as follow the steps Remote controller operation method as per the step 1st step Method) 1 Remove the battery of remote controller 2 Press the temperature raise/down key simultaneously 3 Insert the battery again (Result) If the screen of remocn displays as shown in the right, go to the second step
Applicable key
Display status
2nd step Method) If the first digit of LCD is 0 on the remocon screen, go to the 3rd step.
i If it is 1, press the mode key once to change to 0 and go to the 3rd step.
3rd step Method) Press the marked key to input the option number. example) 021E31 Result) Go to 4th step if it displays as shown in the right (The number increases from 1~9, and A, b, C, d, E, F whenever pressing the key.)
