4. Adjustment procedure
(1) PIT disc (TEST DISC: TGYS1) Insert a disc and press the �PLAY� key. (Be careful of the direction of the unit.) After �AUTO ADJ H� appears on the LCD of the remote control, �COMPLETE� appears. (2) GRV disc (SONY MDW-74) Insert a disc and press the �PLAY� key. (Be careful of the direction of the unit.) After �AUTO ADJ L� appears on the LCD of the remote control, �COMPLETE� appears. * If �Failed� appears during adjustment, it means that the adjustment was suspended due to an error.
5. Others
(1) Initializing the EEPROM While �IDLE� is displayed, press the DISP/SEARCH key to initialize the EEPROM. After initialization, �EP INIT OK� appears on the LCD. * After initialization, perform the adjustment again, otherwise �NO ADJUST!� will appear during normal use.
TR NO.
EP I NT
OK
(2) Sled operation check While �IDLE� is displayed, move the pickup to the outer circumference by pressing the F-SKIP, then move the pickup to the inner circumference by pressing the B-SKIP.
