|
No hay comentarios de productos.
DISASSEMBLY INSTRUCTIONS
1. Removing the PANEL, BOT Remove the screw A*1 and screw B*6, and remove the PANEL, BOT in the direction of the arrow. * When attaching the PANEL, BOT, set the KNOB, SL HOLD.
KNOB, SL HOLD
B
PANEL, BOT
B
A
B
B
B
B
2. Removing the MAIN C.B 1) Connect the shorting lands of the pickup by a solder bridge. * When the MAIN C.B is attached, remove the solder bridge. 2) Remove the FFC of the CN300, CN700 and CN100. 3) Remove the screw A*3 and screw B*1. 4) Remove the battery lid and remove the MAIN C.B, while being careful of the BAT-CONTACT +. * When the MAIN C.B is attached, be careful of the BAT-CONTACT +.
HINGE ASSY, BATT
* The BAT-CONTACT + is attached under the HINGE ASSY, BATT
B
BAT-CONTACT +
A A
A
MAIN C.B
4
|
