SHARP AL10PK
Manual de Servicio

AL-1041
6) �Installation from CD-ROM� window will appear. Insert the installation CD-ROM into the CD-ROM drive. Type R:\ (if the CD-ROM is designated as drive R) and click the OK button. Proceed to step 7. 5) Select Search for the best driver for your device and click the Next button. 6) Insert the installation CD-ROM into the CD-ROM drive. Select the CD-ROM drive and click the Next button.

7) The installation program will start. To install the printer driver to the default folder, click the Next button. To select a different folder, select Browse and type in the new path and folder name. Click OK and say YES to create the folder, select the Next button to continue. 8) On the display, you will see �printer port to be used�. Normally, this is LPT1 and it is selected automatically. Ensure that Yes is checked to use the printer as the default printer. Finally click the Next button. 9) A �Confirm installation� window will be displayed. To continue installation, click the Yes button. 10) When the installation is complete, you will be asked whether or not to print a test page. If you wish to do so, click the Yes button. At this time, ensure that paper is loaded in the paper tray. 11) If the test print completes successfully, click the Finish button. �The installation of the SHARP AL-1000 Series Software is complete.� window will be displayed. Click the OK button. B. Windows 98: 1) Load paper into the paper tray of the printer. 2) Turn on the printer. 3) Turn on your computer and start Windows. q Before installing the printer driver, be sure to close all other applications which may be open. 4) When using Windows 98 on a personal computer with plug & play*, the �Add New Hardware Wizard� window will appear. Click the Next button and follow the on-screen instructions. q If the �Add New Hardware Wizard� window does not appear, proceed to step 8. 5 Plug & play: For plug & play information, see page 4-1.

7) Windows driver file search will find the device SHARP AL1000 Series. Click the Next button. Proceed to step 9. 8) Insert the installation CD-ROM into the CD-ROM drive. Click the Start button and select Run. When the window shown below appears, type R:\SETUP (if the CD-ROM is designated as drive R) and click the OK button. Proceed to step 9.

9) The installation program will start. To select a different folder, select Browse and type in the path and folder name where the printer driver will be installed. Click OK and say YES to create the folder, select the Next button to continue. To install the printer driver to the default folder, click the Next button. 10) On the display, you will see �printer port to be used�. Normally, this is LPT1 and it is selected automatically. Ensure that Yes is checked to use the printer as the default printer. Finally click the Next button. 11) A �Confirm installation� window will be displayed. To continue installation, click the Yes button. 12) When the installation is complete, you will be asked whether or not to print a test page. If you wish to do so, click the Yes button. At this time, ensure that paper is loaded in the paper tray. 13) If the test print completes successfully, click the Finish button. �The installation of the SHARP AL-1000 Series Software is complete.� window will be displayed. Click the OK button. C. Windows 3.1x: 1) Load paper into the paper tray of the printer. 2) Turn on the printer and then start Windows on your computer. q Before installing the printer driver, be sure to close all other applications which may be open.

4-2