|
No hay comentarios de productos.
PRODUCT SHEET
1. 2. 3. 4.
Control panel. Grease filters. Halogen lamps. Flue.
CONTROL PANEL
a. b. c. d. e.
Light ON/OFF switch. Motor OFF switch. Speed 1 selector switch. Speed 2 selector switch. Speed 3 selector switch.
To clean the grease filter
Wash the grease filter at least once a month. 1. Disconnect the electrical power supply. 2. Remove the grease filters - Fig. 1: pull the spring release handle (f1) downwards, then remove the filter (f2).
f1 1 f2 4
a bcde
3. After cleaning the grease filter, remount in reverse order
ensuring the entire extraction surface is covered.
Fitting or renewing the carbon filter - Fig. 2:
1. Disconnect the electrical power supply. 2. remove the grease filter/s. 3. If the carbon filters are already mounted (two filters covering
the motor protection grille) and need renewing, turn the central handle anticlockwise until the filters release. 4. If the filters are not already fitted locate one on each side to cover both motor protection grilles, then turn the central handle of the filters clockwise. 5. Refit the grease filters.
3
Fig. 1
2
Replacing bulbs
1. Disconnect the electrical power supply. 2. Use a small screwdriver or any other suitable tool to prise off
(m - Fig. 3) the lamp cover (p - Fig. 3).
3. Remove the burnt-out bulb.
Replace using 20 W max halogen bulbs only, making sure not to touch them with your hands. 4. Close the lighting unit (snap-on).
Fig. 2
Fig. 3
5019 318 33223
D
GB
F
NL
E
P
I
GR
|
