WHIRLPOOL AKP710/WH
Manual de Usuario

56832Gb.fm5 Page 23 Monday, September 17, 2001 3:23 PM

ELECTRICAL CONNECTION
� Warning: Do not connect to the power supply before you have finished connecting the oven and cooktop. Make sure the oven is installed and connected to the electricity supply by a qualified technician in accordance with the manufacturer�s instructions and in compliance with local regulations. The installer is responsible for the correct electrical connection of the oven and the observance of the relative safety prescriptions. � The oven must be connected to the electricity supply by means of an all-pole disconnect switch with minimum contact gap of 3 mm. The appliances must be earthed by law. Do not use multiple plug adapters or extension leads. After the oven has been installed, the electrical components must be inaccessible.

�

� � �

�

Interconnecting cooktop and oven
� Make sure that the voltage shown on the rating plate is the same as the power supply voltage in your home. The rating plate is on the front edge of the oven cavity (visible with oven door open). Use a type H05RR-F power cord (minimum length 800 mm):

�

Conductors X number 1N + 2N + 3+ 3N +

Connection H05 RR-F 3x4 mm² H05 RR-F 4x2.5 mm² H05 RR-F 4x2.5 mm² H05 RR-F 5x1.5 mm²

~ ~ ~ ~

23