Performing the viewfinder adjustments
(The viewfinder is an optional accessory.)
Attaching the viewfinder
1 2
Check that the camera�s POWER switch is at the OFF position. Attach the accessory mounting plate to the viewfinder.
Remove mounting plate from the viewfinder
5
Connect the plug to the viewfinder�s connector. <Note> When connecting the plug to the viewfinder�s connector, ensure that it is fully and securely inserted.
Mounting plate supplied to AK-HC931P
Detaching the viewfinder
1 2 3
Pull up the knob on the mounting plate and slide the plate to attach the viewfinder.
Pull up the knob
Check that the camera�s POWER switch is at the OFF position. Loosen the stopper screw, pull up the knob on the mounting plate and slide the viewfinder along and off the plate.
Stopper screw Pull up the knob
3 4
Tighten the stopper screw securely.
Disconnect the plug from the viewfinder cable connector.
