4. INSTALLATION METHOD (HOW TO INSTALL THE VECHICLE)
Should be determined before the unit install under carpet. Adjust the installation bracket with bolts to suit the place of installation.
5. PREPARATIONS
§ USAGE OF MAGAZINE (To load the discs)
* Load the discs with the labels facing upwards, as shown in the diagram.
Tray extracted direction Magazin Label Side Tray
Disc
* Remove the floor carpet and decide on the place to install. * Remove the separator of the cushion rubber that is attached to the installation bracket with bolt and install accordingly. * Align the unit with the bolts and secure it with the wing nuts.
§ TO LOAD THE MAGAZINE
* Slide the sliding door to the right until it is completely latched on. * Load the magazine in the direction as shown in the diagram push it in until is locked into the unit. * After the magazine has been loaded, close the sliding door. (If not close sliding door, Dirt or dust entering it will cause damage)
§ TO REMOVE THE MAGAZINE
* Open the sliding door and depress the eject button. * Remove the magazine when it has been ejected. * Close the sliding door.
