CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER MOUNTING OF THE OPTIONAL INTERFACE BOARD TO AUTHORIZED SERVICE PERSONNEL.
CAUTION:
TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, ACCESSORIES ONLY. indicates safety information. USE THE RECOMMENDED
The AJ-YA120AG is an HD-SDI input/output, SD-SDI output board which is designed to be used exclusively with the AJ-HD1200A digital VTR. By installing it in the AJ-HD1200A, it is possible to input and output HD digital signals and also to output SD digital signals. A function for up-conversion to HD and a line converter function (1080i ,. 720p) are also enabled. Gen-locking to an external device is enabled by connecting a HD tri-level sync or black burst signal to the REF input connector.
Accessories packed together with AJ-YA120AG
The following items are provided with the AJ-YA120AG. Check that they are present and accounted for.
Connector protective cover
Precautions
ODo not touch this product with wet hands. ODo not drop this product or subject it to other strong shock. ODo not attempt to modify this product. Doing so may cause it to malfunction. BNC connector panel SDI board The AJ-YA120AG HD-SDI input/output, SD-SDI output board is designed to be used exclusively with the AJ-HD1200A digital VTR. It cannot be used with models other than the AJ-HD1200A. Consult with your dealer when installing the board in the VTR. Connector clamps 1, 2 (Provisionally secured to the SDI board)
Models supported
Digital VTR: AJ-HD1200A UDC board
Contents
Precautions ....................................... 2 Models supported ............................. 2 Features ............................................. 3 Accessories packed together with AJ-YA120AG ...................................... 3 Installing the board in the AJ-HD1200A ...................................... 3 Reference signals .............................. 9 Reference frequencies.................... 10 Specifications ................................. 11
Installing the board in the AJ-HD1200A CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
The AJ-YA120AG must be installed in the AJ-HD1200A in order for it to be used. Follow the procedure below for installation.