|
No hay comentarios de productos.
Disassembly Procedures for AJ-BS900HP/EN
1. Removal of the Front Panel
1. Unscrew the 4 screws (A), and remove the Front Panel.
4. Removal of the BS Front C.B.A.
1. 2. Loosen the 3 worm screws (A), and pull out the Knob. Pull out of the Set Up Knob.
SET UP KNOB
(A)
(A)
(A)
(A)
2. Removal of the C.B.A. Fixed Angle
1. Unscrew the screw (B), and remove the C.B.A. Fixed Angle.
3. 4.
Unscrew the 4 screws (C), and remove the connector (P1). Unscrew the 4 screws (D), and remove the BS Front C.B.A..
(D) (B) (C) (P1) (C)
(D)
3. Removal of the Card Edge C.B.A.
1. Pull the Card puller, and pull out the C.B.A. a little way. 2. Disconnect the connector (J1), and the pull out the C.B.A.
5. Removal of the Top Panel
1. Unscrew the 4 screws (E). 2. Unscrew the 4 screws (F), and remove the Top Panel.
(F)
Card Puller
(J1) (F)
(E)
DIS-3
|
