PANASONIC AJRC10G
Manual de Usuario

Menu operation
Operations using the LCD panel
The menu can be adjusted using the Rotary Encoders (1 to 3) after displaying the menu on the LCD panel.

Operation of the camera recorder menu
With the unit, it is possible to set the menu of the camera recorder by checking the monitor. Use this feature to set any items that are not included in the unit menu.

1 Press one of the following buttons: BLACK/ 2 The indication will switch to the item under
the panel # the item on the panel # the state before entering the menu mode # the item under the panel step by step every time the button is pressed. The LED indicating the selected item is on and the first layer of the menu for the selected item is displayed on the LCD panel. SHAD button, FLARE/MATRIX button, GAMMA/DTL button, WHITE/SKINDTL button, or KNEE/FUNC button to select an item on the menu.

1 Connect the VIDEO OUT connector of the
unit to the monitor.

2 Press the MENU ON button for 3 seconds or
longer. The menu of the camera recorder is displayed on the monitor. <Note> When the lamp of the CHARA ON button is off, the menu is not displayed on the monitor.

3 Move the layer on the menu using the 4
button or 3 button. (Indications are not looped.)

3 Operate the menu by operating the Rotary
Encoder 3 in the same way as the JOG dial on the main unit of the camera recorder.

<Note>
Significant items such as frame frequency etc., cannot be changed from the unit. In this case, these items can be changed from the camera recorder. For details such as menu items and setting methods, refer to the operation manual of the camera recorder.

4 Adjust the value of the sub-items on the
menu using the rotary encoder. The numerical values are increased by turning the rotary encoder clockwise and reduced by turning it counterclockwise. Depending on the layers, 1 to 3 sub-items are displayed on the LCD panel. (In some layers, it is necessary to press the rotary encoder3)

Adjustment of functions on the unit
It is possible to adjust the sound heard when a button on the unit is pressed and the brightness of the LCD panel button by using the menu of the unit. For details, refer to �SYSTEM� (page 31).

5 When the camera menu is open, the menu
displayed on the LCD panel of the unit is closed, �CAMERA MENU OPEN� is displayed.

E-23