Disengaging the unit from the tripod mount adaptor
Tripod mount adaptor
Red lever
Black lever
Move the black lever in the direction indicated by the arrow while holding down the red lever, and disengage the unit by sliding it toward you.
NOTE:
If the pin of the tripod mount adaptor fails to return to its original position after the unit has been disengaged, again move the black lever in the direction indicated by the arrow while holding down the red lever. This returns the pin to its former position. Bear in mind that the unit cannot be mounted if the pin is left in the center.
Fastening the shoulder belt (option)
Shoulder belt
The tab opens when pressed.
To release the shoulder belt, open the tabs at both ends and disengage.
The tab opens when pressed.
NOTE:
Check that the shoulder belt is securely fastened.