PHILIPS AJ3144/17
Manual de Usuario

black film width 138 mm

SAFETY
Know these safety symbols
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

Installation
POWER CONNECTION
1. Check if the AC power voltage as shown on the type plate on the back of the set corresponds to your local AC power supply. If it does not, consult your dealer or service organization. 2. Connect the power plug to the wall outlet. � The power supply is now switched on and the numbers on the display will start to flash. You will need to set the correct time. 3. To disconnect the set from the AC power completely, withdraw the power plug from the wall outlet.

Clock / Radio
SETTING THE CLOCK
Clock display The time is displayed using the 12-hour clock system where the PM indicator lights up (on=PM, off=AM) in the top left corner of the display. The display also indicates whether you have switched on the alarm(s). These indicators will light up respectively next to ALARM 1 and ALARM 2 on the display. 1. Press and hold down the TIME button. 2. Use the 4 and 7 buttons to set and adjust the hours and minutes. � With 7 pressed: the time will increase rapidly from minutes to hours. Release 7 when you have reached the correct setting. � Pressing 4 will allow you to adjust the time backward minute by minute if necessary.

Slumber
SLUMBER TIME
The clock radio has a built-in SLUMBER function. This function enables you to listen to the radio at bedtime without having to get up to switch the radio off. The radio will automatically switch off at the time set. The maximum slumber time is 59 minutes. Setting the slumber time The length of time you listen to the radio before you fall asleep is called the slumber time. 1. Set the RADIO switch to OFF. 2. Set your slumber time by pressing the SLUMBER button. � If you press the SLUMBER button once, 59 will appear on the display, indicating that you have a slumber time of 59 minutes. � If you keep the SLUMBER button pressed, the display will slowly begin to count down from 59 to 00 minutes. Release the button as soon as the required slumber time is reached. Cancelling the slumber time You can switch off the radio before the slumber

Maintenance
MAINTENANCE
� If you do not intend to use the clock radio for a long time, disconnect the unit by removing the plug from the wall outlet. The battery should also be removed to prevent danger of leakage which will damage your unit. � To clean your unit from fingerprints, dust and dirt, use a clean, soft, damp cloth or chamois leather. Do not use cleaning products which contain benzene, thinner, etc. as these may harm the housing. � Avoid exposing the clock radio to rain, dampness and extreme heat to prevent a safety hazard as well as damage to the unit.

WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
The set complies with the FCC-Rules, Part 15.

DISPLAY 1
AJ 3140 FM AM CLOCK RADIO

AJ 3140 Dual Alarm Clock Radio

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

0 9 8 7 6
IO IOIOI IO
IOIOIOI IOI

Time 10;50 PM Alarm 1 activated L�heure 10:50 PM Alarme 1 activée
ALARM 2

! @

PM

T This bolt of lightning indicates uninsulated
shock. For the safety of everyone in your household, please do not remove product
IOIOIOI

1050
ALARM 1

material within your unit may cause an electrical

IOIOIOI

IOIOIO

IO

O IOIOIIOI

I IIOIOIOI IOIOIO IO

S
108 zAM zAM � 108 104 � 104 1600 kH 1600 kH
1300 1300
Hz FM Hz FM M M

T AL

ARM

PEA RE

covering. This exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

#
IOIOIO
IOI IOIIOIO IOIO

La hora del reloj (AM) Despertador apagado

MH FM MHzkHz A M kHz AM

z

88

� 92 �
0 5 30 53

9 96 �

100 �

1 0 00 1 0 00

POWER FAILURE
� When a power failure occurs, the clock radio

6 30 6 30

800 800

IIOI IO IOIOIO

DISPLAY 2
ALA
RM
M 8 MH M 4 � 108 00 kHzAM � 10 0 kHzA � 10 16 � 104 0 160

5

T EA EP RE

Hz FM z FM

Clock time (AM)
AJ 3140 FM AM CLOCK RADIO

SAFETY INSTRUCTIONS � Read before operating equipment
AL AR M1 OIOIO OIO OIOIO IO

AJ31

4 0 FM

OC AM C L

IO K R AD
L2

will be switched off. � When the power supply returns, the numbers on the display will start to flash and you will need to reset the correct time on the clock.
AC Polarized Plug

A

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc. 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. 6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

AL AR M

PM

11. Grounding or Polarization Precautions that should be taken so that the grounding or polarization means of an appliance is not defeated.

RADIO
You can use this clock solely as a radio 1. Set the RADIO switch to ON. 2. Select your wave band using the BAND switch. 3. Locate the required radio station using the TUNING dial. 4. Set the volume by turning the VOLUME knob. 5. To turn off the radio, set the RADIO switch to OFF. Antenna: � For FM reception, use the external pigtail antenna. Adjust the pigtail antenna slightly to obtain optimum reception. � For AM reception, the set is provided with an internal antenna. By adjusting the position of your clock radio, optimum reception can be obtained. Place the set on a non-metallic surface to avoid any deterioration of AM reception.

FM

AM M A

z z MH MH

130 100 00 1300 9 � 0 1 0 00 10 � 96 92 � 800 0 88 � 9 630 8 30 8 6
0 530 53

Alarm setting deactivated
PM

z Hz kH k

$

1 O OIOI OIOIO IO O IO

AL 1

CAUTION: To prevent

A LA R M O1 OIO OIOIO IOIO IO

rm a la r al du

electric shock, match the wide blade of this plug to the wide slot, thenfully insert. Do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. 12. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. 14. Power Lines - An outdoor antenna should be located away from power lines. 15. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 16. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

� To retain the clock time and the set alarm time(s) in the event of an AC power failure or disconnection, you can insert a 9 volt battery (not included), type 6F22, into the battery compartment. Should there be a power failure, the clock will continue to function. However, the time will not be illuminated on the clock display, as the use of the battery is strictly to retain both the set clock and alarm time(s) only, where actual operation of the alarm and radio is excluded. As soon as the power is switched on again, the display will indicate the correct time. 1. Before inserting the battery, connect the power plug to the wall outlet. 2. Place the battery in the battery compartment on the bottom of the clock radio. � Replace the battery once a year, or as often as necessary.

7 31
4
AL AR M

L�heure actuelle (AM) Alarme désactivée
ALARM 2

time has elapsed. 1. Press the SLUMBER OFF/REPEAT ALARM button to cancel the slumber function.

3

1 OIO OIOIO OIOIO IO

AJ3

M AM 140 F

IO K RAD CLOC
AL 2

% ^

ALARM 1

Clock time (AM) Ala rm setting deactivated

PM

Note: � The slumber function does not affect the alarm setting(s). � If you have an alarm set in the radio mode, make sure you have adjusted the volume loud enough to wake you up before you set the slumber time.

2

ALA RM O1 OIOI OIO O IOIO IO

AL 1

DISPLAY 3

& 1
A LAR M O1 OIIOI OIOIO OO IO

AJ 3140 FM AM CLOCK RADIO PM
l dua

Slumber time Alarm 1 and 2 both active La durée SLUMBER Alarme 1 et 2 activées
ALARM 2

Owner�s Manual Mode d�emploi Instructivo de manejo

7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For 17. Damage Requiring Service - The appliance should be serviced by example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed qualified service personnel when: in a built-in installation, such as a bookcase or cabinet that may A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has spilled into the appliance; or impede the flow of air through the ventilation openings. C. The appliance has been exposed to rain; or 9. Heat - The appliance should be situated away from heat sources D. The appliance does not appear to operate normally or exhibits a such as radiators, heat registers, stoves, or other appliances marked change in performance; or (including amplifiers) that produce heat. E. The appliance has been dropped, or the enclosure damaged. 10. Power Sources - The appliance should be connected to a power 18. Servicing - The user should not attempt to service the appliance supply only of the type described in the operating instructions or as beyond that described in the operating instructions. All other marked on the appliance. servicing should be referred to qualified service personnel. 91/8 EL 4562-1

m alar m a

009
ALARM 1

El tiempo de dormitado Despertador 1 y 2 activados

The model and production number are located on the rear of the set.

AJ 3140 Dual Alarm Clock Radio

LIMITED WARRANTY
MAGNAVOX PORTABLE AUDIO
90 Days Free Exchange This product must be carried in for an exchange
WHO IS COVERED? You must have proof of purchase to exchange the product. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner�s manual and keep both nearby. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For 90 days thereafter, a defective or inoperative product will be EXCHANGING A PRODUCT IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS Contact your dealer to arrange an exchange. Or, ship the product, insured and freight prepaid, and with proof of purchase enclosed, to the address listed below. Small Product Service Center Philips Service Company 907 Snapps Ferry Road, Plant 2, Building 6 Greeneville, TN 37743

Alarm
SETTING THE ALARM
You may set two different alarm times with this clock radio. This can be useful when, for example, you need to wake at a different time during the week and at the weekend. Setting alarm time 1 and 2 1. Press and hold down the ALARM 1 or ALARM 2 button to set the alarm time. 2. Use the 4 and 7 buttons to set and adjust the hours and minutes. � With 7 pressed; the time will increase rapidly from minutes to hours. Release 7 when you have reached the correct setting. � Pressing 4 will allow you to adjust the time backward minute by minute. 3. Release the ALARM 1 or ALARM 2 button and the 7 or 4 buttons when you have reached the correct setting. � The clock display goes back to clock time. To review your set alarm time, press the appropriate ALARM 1 or ALARM 2 button. Wake by buzzer: 1. Set the ALARM 1 mode or ALARM 2 mode selector to BUZ(zer). � The respective ALARM indicator lights up on the display. At the set alarm time, the buzzer will switch on and it will automatically switch off 59 minutes later.

Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. 1 RADIO 2 ALARM 2 mode selector BUZ(zer) RAD(io) OFF 3 ALARM 1 mode selector BUZ(zer) No sound. Volume not adjusted. Power cord not securely connected. Adjust the VOLUME. Connect the power cord properly. Move the clock radio away from electrical equipment. Adjust the pigtail antenna. 8 ALARM 1 9 ALARM 2 0 TIME ! RESET @ SLUMBER OFF/REPEAT ALARM # Dial scale $ VOLUME % Display ^ BAND & TUNING RAD(io) OFF 4 Speaker 5 SLUMBER 6 7 fast up: 7 4 slow down Intermittent crackling sound during FM reception. The alarm does not function. Weak signal.

ENGLISH
to switch radio mode ON/OFF to activate buzzer for Alarm 2 setting to activate radio for Alarm 2 setting to switch off Alarm 2 to activate buzzer for Alarm 1 setting to activate radio for Alarm 1 setting to switch off Alarm 1

FRAN�AIS
mise en/hors circuit (ON/OFF) de la radio sélecteur de mode ALARM 2 réveil par la sonnerie à l�heure de réveil 2 réveil par la radio à l�heure de réveil 2 arrêt de l�alarme 2 sélecteur de mode ALARM 1 réveil par la sonnerie à l�heure de réveil 1 réveil par la radio à l�heure de réveil 1 arrêt de l�alarme 1 Haut-parleur

ESPA�OL
para encender/apagar (ON/OFF) la radio selector de modo ALARM 2 para despertarse con el zumbador a la 2ª hora de despertarse para despertarse con la radio a la 2ª hora de despertarse para apagar el despertador 2 selector de modo ALARM 1 para despertarse con el zumbador a la 1ª hora de despertarse para despertarse con la radio a la 1ª hora de despertarse para apagar el despertador 1 Altavoz para ajustar/activar el tiempo de dormitado para ajustar las horas y los minutos para el reloj (TIME) y el despertador (ALARM TIME) para ajustar las horas y los minutos para el reloj (TIME) y el despertador (ALARM TIME) para ajustar/verificar la 1ª hora de despertarse (ALARM 1) para ajustar/verificar la 2ª hora de despertarse (ALARM 2) para ajustar el reloj para apagar el despertador por 24 horas para apagar el despertador por 7 minutos Cuadrante para ajustar el volumen Presentación para seleccionar la banda de ondas FM-AM para sintonizar la emisora de radio deseada

Problem

Possible Cause

Remedy

replaced with a new, renewed or comparable product at no charge to you. A replacement product is covered only for the original (In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranty period. When the warranty on the original product expi- warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the res, the warranty on the replacement product also expires. duration of this express warranty. But, because some states do WHAT IS EXCLUDED? not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) Your warranty does not cover: � labor charges for installation or setup of the product, EXCHANGING A PRODUCT IN CANADA adjustment of customer controls on the product, and installation Contact your dealer to arrange an exchange. Or, ship the product, or repair of antenna systems outside of the product. � product repair and/or part replacement because of misuse, insured and freight prepaid, and with proof of purchase enclosed, accident, unauthorized repair or other cause not within the to one of the Philips consumer service centers listed below. control of Philips Consumer Electronics Company. Philips Electronics Ltd. 601 Milner Avenue, Scarborough, � reception problems caused by signal conditions or cable or antenna systems outside the unit. Ontario, M1B 1M8 - 3 (416) 292-5161 � a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. � incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) � a product used for commercial or institutional purposes. WHERE IS EXCHANGE AVAILABLE? You may exchange the product in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide a replacement product (although there may be a delay if the appropriate product is not readily available). 4977 Levy Street, St. Laurent, (Montréal), Québec, H4R 2N9 - 3 (514) 956-0120 1741 Boundary Road, Vancouver, B.C., V5M 3Y7 - 3 (604) 294-3441 (In Canada, this warrantyexpressed or implied, including any No other warranties are is given in lieu of all other warranties. implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.) TO GET OUT-OF-WARRANTY EXCHANGE

ALARM OFF
There are three ways to switch off the alarm. Switching off the alarm for 24 hours 1. Press the RESET button. � The alarm is now switched off for 24 hours and will sound again the next day at the same time. Switching off the alarm temporarily For both alarm modes (radio or buzzer) this will repeat your alarm at seven minute intervals. 1. Press the SLUMBER OFF/REPEAT ALARM button. � The alarm will temporarily switch off. Seven minutes later, the alarm (radio or buzzer) will sound again. 2. Press the SLUMBER OFF/REPEAT ALARM button again if you wish to repeat the alarm call. � If the SLUMBER OFF/REPEAT ALARM button is not pressed again, the alarm will automatically switch off 59 minutes later. Your alarm time setting will then automatically enter the RESET mode and will sound at the same time the next day. Switching off the alarm completely 1. Push the ALARM 1 mode or ALARM 2 mode selector to the OFF position, before or during the set alarm time. � The alarm indicator will disappear from the display. Environmental information All unnecessary packaging material has been omitted. We have tried to make the packaging easy ta separate into three mono-materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags). Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment. AM broadcast cannot be received. Set is too close to electrical equipment e.g. TVs, computer, fluorescent lamps. to set/activate slumber time to adjust the hours and minutes for TIME and ALARM TIME to adjust the hours and minutes for TIME and ALARM TIME to adjust/review ALARM 1 to adjust/review ALARM 2 to adjust clock time to stop the active alarm for 24 hours to switch off the alarm for 7 minutes to adjust the sound level réglage/activation du mode SLUMBER réglage des heures et des minutes pour l�heure (TIME) et l�alarme (ALARM TIME) réglage des heures et des minutes pour l�heure (TIME) et l�alarme (ALARM TIME) réglage/vérification de l�alarme 1 (ALARM 1) réglage/vérification de l�alarme 2 (ALARM 2) réglage de l�heure arrêt de l�alarme pour 24 heures arrêt de l�alarme pour 7 minutes Cadran réglage du volume Afficheur to select FM-AM waveband to tune to radio stations choix de la bande d�ondes FM-AM accord sur l�émetteur

The alarm is not set. Volume is too low for radio.

Set the alarm time and set the alarm switch to BUZ or RAD. Increase the volume.

ALARM ON
The clock radio can wake you in two ways: Wake by radio: 1. Tune to the desired radio station using the TUNING knob. Make sure you have adjusted the volume loud enough to wake you up. 2. Set the ALARM 1 mode or ALARM 2 mode selector to RAD(io). � The respective ALARM indicator lights up on the display. At the set alarm time, the radio will switch on and it will automatically switch off 59 minutes later.

In U.S.A., Puerto Rico or U.S. Virgin Islands, contact Philips Service Company at 3 (800) 851-8885 to obtain the cost of outof-warranty exchange. Then carefully pack the product and ship it to the Small Product Service Center (address listed above). In Canada, contact the nearest Philips consumer service center

BEFORE REQUESTING EXCHANGE... (phone number and address listed above) to obtain the cost of outPlease check your owner�s manual before requesting an exchange. of-warranty exchange. Then carefully pack the product and ship it to that service center. Adjustments of the controls discussed there may save you a trip. REMEMBER Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if it is necessary. Model # Serial #

This warranty gives you specific legal rights. You may have other rights which vary from state to state.

PHILIPS CONSUMER ELECTRONICS COMPANY
A Division of Philips Electronics North America Corporation Knoxville, Tennessee 37914-1810, U.S.A.
IB7573Too1 Printed in Hong Kong TC Text/CvB/9607/1

Philips Service Company P.O Box 555 Jefferson City, Tennessee 37760 3 (423) 475-8869

EL4966E001 / MAC 4107 / 12-94