|
No hay comentarios de productos.
JAA77051-R.3477.A
FOCUS RING #26
INC
SWM ASSEMBLY
��Addition�
Caution 1: When the index tape (1K470-125) is adhered, be careful of the below and adhere it as shown in "Fig.1", â� Be careful of the bottom position of the tape, and the tape must not be overlapped on the red shaded area of Fig.1. â�¡ After adhering the index tape, check for infinity focus.
��Revision�
��Addition�
Index tape
Adhere the tape starting at the positon 11-mm away from the left edge.
��Addition� Fig.1 ��Addition�
180 deg. turning position in the opposite direction from the pin that works with the distance encoder brush.
Note 2:For assembling the SWM unit, pay more attention not to deform the external spring bars. �After assembling the SWM unit, rotate both the focus ring #26 and the SWM unit to align the holes with each other. Then, attach both #158 and #159 on the appointed three spots each.
Changed page �� 5 �Ｌ 19�AF-S17-35/2.8D � January. 23 .2007
|
