C Select [DF Setting] with the <>
keys, then press the [Select] key.
1
B4 A3
CP19AEE
ND2C0109
1: Set into the document feeder (ADF).
Important � If the originals are of different vertical sizes, put the longer original on the bottom; otherwise the original size might not be detected correctly.
2
D Select [Mixed Sizes] with the <>
keys, then press the [Select] key.
G Adjust
ND2C0109
the guide to the widest original size. into the document feeder.
H Set the aligned originals face up
Thin paper mode
Note � Set to Thin Paper mode when you place thin paper into the document feeder; otherwise your originals may be damaged.
Note � To deselect [Mixed Sizes], press the [Select] key again.
E Press the [Exit] key.
A Press the {Menu} key.
ND2C0103
Enhanced Image Menu Menu Meny 1 2
F Align the rear and left edges of
the originals as shown in the illustration.
