PHILIPS AE5900/05
Manual de Usuario

Basic Operation
Basic operation
1 Connect the supplied switching adapter to the wall outlet and the DC jack on the set. � The radio tunes to a DAB station and the clock is set automatically. In DAB mode, press SOURCE to select FM or AUX IN mode. Press 2 to switch to standby mode. � The clock information is displayed. In standby mode, press 2 to switch to the last selected sound source. To adjust volume, turn VOLUME +/�. To improve DAB/FM reception, extend and turn the telescopic antenna. Reduce its length if the signal is too strong. To further improve DAB reception, you may also perform manual tuning (See Manual Tune) Helpful hints: � DAB is the default sound source, and the clock sets automatically according to the time information of the station. � If there is no DAB coverage currently available, or DAB signal is too weak, in your area, no DAB station will be found, and information like "No stations available" will be displayed. Dimming LCD brightness 1 Press and hold DISPLAY for 2 seconds to switch Dim on or off. � Auto dim on will be activated if dim function is off in the last setting. � Auto dim off will be activated if dim function is on in the last setting. If Dim function is activated and there is 5 seconds of button inactivity, the LCD brightness is decreased to save power. Pressing any button resumes the original LCD brightness. 1 2 1 2

DAB Radio
Switching on DAB radio
For the first time when the set is powered on, DAB mode is selected and an auto scan is performed(see 2).Then all the available DAB stations will be stored on the set, and the radio will tune to the first available station. In standby mode, press 2 to switch to the last selected sound source. Press SOURCE repeatedly to select DAB mode, if DAB mode is not selected. � "PHILIPS DAB & FM Radio" is displayed briefly (see 3), then the radio auto tunes to a station.

� � � 2 3

Changing DAB stations
In DAB mode, press 1 / 2 repeatedly until your desired station name is displayed. Press SELECT to confirm. � The radio will immediately tune to the selected station. About station display symbols You may see some symbols displayed before the station names as follows: ?:The symbol indicates that the station is not currently available, or not active. >>:This symbol indicates that the station is a primary station with secondary service. <<:This symbol indicates that the station is a secondary station.

�

2