|
No hay comentarios de productos.
HOW TO FILL THE RINSE AID DISPENSER
The rinse aid facilitates drying and prevents the formation of unsightly spots, streaks and carbonate deposits on crockery. Before using the dishwasher for the first time, fill the rinse aid dispenser. Thereafter, regularly check the rinse aid level. Only use rinse aids recommended for use in domestic dishwashers. 1. Unscrew the cap. Fill the dispenser with rinse aid while monitoring the level indicator D (about 130 ml). 2. Immediately wipe away any spilt rinse aid to prevent excess suds which may spoil washing results. 3. Close the cap or lid. Visual indicator: light = empty dark = full.
How to adjust the rinse aid dosage regulator.
(Open the cover and close again following adjustment). Factory setting: 3. If you are not satisfied with washing or drying results, change the dial setting with a spoon handle or coin (see E in the drawing). If crockery is prone to whitish streaks, reduce the dosage by turning the dial to a lower setting. If instead crockery is wet, dull or spotted, increase the dosage by turning the dial to a higher setting. Rinse aid level indicator (visual or electric indicator depending on the model installed).
HOW TO FILL THE DETERGENT DISPENSER
Only use detergents recommended for use in domestic dishwashers. If you use �new generation� enzyme-based detergents, select the Bio programmes which are also suitable for all normal detergents. If you use detergents in pellet form, follow the manufacturer's directions for use. Always use the recommended dosage stated on the detergent pack. The use of detergent in excess of the recommended dosage may cause suds, poor washing results and pollution. The recommended dosage varies between different brands. Only fill the detergent dispenser prior to start a wash programme. To open on lid (see C in the drawing).
55
|
