1. Unplug the power cord. 2. Remove two screws from bottom edge of front panel. Remove the front panel from unit when cleaning. 3. Lii the front panel up and toward you. 4. Remove slide-out air filter and clean separately. (See �Cleaning the slide-out air filter� below.) NOTE: Front panel does not have to be removed to clean fitter. 5. Clean front panel with warm water, mild soap or detergent and a soft cloth. 6. 7. 8. 9. Rinse front panel and dry thoroughly. Wipe control panel clean with a soft, dry cloth. Replace front panel and screws. Plug in the power cord.
c
0
I
Screw
Screw
Cleaning
the slide-out
air filter
The air filter is cleanable. A clean air fitter helps remove dust, lint and other particles from the air. Check the air filter every two weeks to see if it needs cleaning. 1. Remove air fifter by sliding it up and out the top of the front panel. 2. Clean filter using a vacuum cleaner. OR If fiker is very dirty, wash it with warm water and mild detergent. Air dry fiker thoroughly before replacing. 3. Replace air fiker by sliding it back down into the opening at top of the front panel.
