WHIRLPOOL ACQ152XP0
Manual de Usuario

3. Place one end of tray center over carriage bolt.

Attach support legs
1. Determine the correct slots on the tray side from the type of exterior construction of the building. Thin wall construction (vinyl, wood, etc.)

1

1. 1st and 2nd slots

Thick wall construction (brick) 1

4. Then place flat washer, lock washer and hex nut. NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed. 1 2 3 4

5
1. Hex nut 2. Lock washer 3. Flat washer 1. 2nd and 3rd slots 4. Tray center 5. Carriage bolt

5. Insert second carriage bolt through tray side and attach other end of support leg. NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.

2. Insert carriage bolt up through slot on tray-frame side and support leg.

1 2 3

4

1. Hex nut 2. Lock washer

3. Flat washer 4. Carriage bolt

6. Install support leg on other side.

6