INSTALLATION LOCATION
The cooker has type �Y� overheating protection so that it can be installed in a cabinet. The kitchen furniture near the sides of the cooker should be made of heat-resistant material.
AMENDED INSTRUCTIONS ANTI-TILT BRACKET
This cooker must not be used until it has been fastened to the anti-tilt bracket. Attaching the anti-tilt bracket: x After you have located where the cooker is to be positioned mark, on the wall, the place where the 2 screws of the anti-tilt bracket have to be fitted. Please follow the dimensions given in the drawing below. x Make two holes of diameter ø 8 mm on the wall and insert the plastic plugs. x Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in one slot of the cooker back. x Attach the anti-tilt brachet tightly. x Push the cooker against the wall so that the anti-tilt bracket is fully inserted in one slot of the cooker back.
Only for DENMARK For 850 mm high cookers, an additional base can be ordered separately which can be installed under the cooker itself, thus bringing the overall height to 900 mm.
Cookers with plinth (H = 900 mm) Cookers without plinth (H = 850 mm)
