Attach Side Curtains
1. Locate the bag of screws provided. 2. Insert the top and then the bottom of the right-hand curtain housing in the top and bottom curtain guides on the air conditioner.
4. While the right-hand curtain is still extended, insert #10 x ¹��" pan-head Phillips screws into the top and bottom slots of curtain. Screw the curtain to the top and bottom holes in the air conditioner cabinet. NOTE: Some curtains may have 2 slots at each end. You will be able to see a mounting hole through the correct slot. 5. Slide the curtain housing into the curtain guides as far as it will go. 6. Repeat the above steps for the left-hand curtain.
Top view
A B
Attach foam adhesive seal
Attach the foam adhesive seal along the bottom of the bottom curtain guide.
A
A. Curtain housing B. Curtain guides
B
Bottom view
A. Curtain housing B. Foam adhesive seal
Install Cabinet into Window
A B
A. Curtain housing B. Curtain guides
NOTES:
s s
Handle the air conditioner gently. Be sure your air conditioner cabinet does not fall out of the opening during installation or removal. The location where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded 3 prong outlet. Do not block the louvers on the front panel. Do not block the louvers on the outside of the air conditioner.
s
3. Extend the right-hand curtain outward so you may insert the first screw through the middle hole of the curtain. Using #10 x ¹��" pan-head Phillips screw, screw the curtain to the middle hole in the air conditioner cabinet. NOTE: This screw is required to correctly attach the curtain (top to bottom) to the air conditioner cabinet.
s s
1. Center the empty cabinet in the window. Check that the lower rail of the air conditioner cabinet is behind and against the back side of the windowsill. Maintain a firm hold on the air conditioner cabinet. Lower the window sash to hold the cabinet in place. 2. Measure the distance between the right-hand side of the cabinet and the inside of the window channel.
