1 SUPPLY POWER TO CHARGER power Plug the AC Adapter/Charger's
cord in to an AC outlet. The power indicator comes on.
4 DETACH BATTERY/BATTERIES in the Slide the battery or batteries
direction of the arrow and lift off. �Remember to unplug the AC Adapter/ Charger's power cord from an AC outlet.
2 ATTACH BATTERY/BATTERIES
Make sure the + � marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger. �The Charge Indicator (1 or 2) begins blinking to indicate charging has started.
NOTE:
Perform charging where the temperature is between 10° and 30°C. (20°�25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.
3 CONFIRM STATUS indicator stops blinking When the charger
but stays lit, charging is finished. �If two batteries are attached to the charger, they will be charged in the order that they were attached.
* When charged at temperatures between 20° and 25°C. �When charging Battery Packs after a long storage period, charging time will be longer than the time indicated above.
EN-5
