ISOLATION TRANSFORMER
Dear Customer,
Thank you for purchasing the JVC Isolation Transformer AA-V31E. Before use, please read the safety precautions below to ensure safe use of your new Isolation Transformer.
AA-V31E
For Customer Use:
Enter below the Model No. and Serial No. which are located on the rear of the cabinet. Retain this information for future reference. Model No. Serial No. 1 Breaker/power switch 2 Power lamp (Green LED) 3 Ground indicator lamp (Red LED)
INTRODUCTION
JVC Isolation Transformer AA-V31E is designed to protect electronic microprocessor-based systems from problems caused by power line disturbances. The model you have purchased is designed for use together with the AC Power Adapter AA-V112E and MICRO HD CAMERA DZ-VCA1SE for medical applications.
Safety precautions
WARNING:
To prevent fire or shock hazard, DO NOT expose this unit to rain or moisture.
INSPECTION
Remove the Isolation Transformer from the shipping container and inspect it for shipping damage. Do not install or operate the product if it appears to be damaged in any way. If damaged, notify the carrier and seller immediately.
WARNING:
To prevent electrical shock, DO NOT remove the Isolation Transformer cover.
WARNING:
The Isolation Transformer�s �thumb screw� groundstud is to be used to connect items such as static discharge floor mats or telephone switch grounds that contain a single conductor ground. Any equipment that is not connected via a 3-conductor power cord will be floating above ground. If the end user elects to provide additional grounds, they must be tied to the ground-stud.
ENVIRONMENTAL CONSIDERATIONS
This Isolation Transformer has environmental requirements similar to other medical devices. It has been designed for indoor use only, in areas where it will not be exposed to excessive dust or moisture. Make certain that there is adequate air flow around the unit. Do not place objects on top of or near the unit which could obstruct the air vents. For installation, please refer to the MICRO HD CAMERA DZ-VCA1SE Instruction Book.
WARNING:
This equipment is not sterilized.
SIZING INFORMATION AND INSTALLATION PROCEDURE
The name plate on the rear panel lists the Isolation Transformer voltage and current ratings. Observe that the input current rating is not exceeded when connecting equipment. Ask that installation be performed by a JVC authorized dealer.
