128
After the communicator has been locked, it cannot be used until the correct lock code is given. However, incoming voice calls can be answered via the phone, and faxes and short messages are received normally. Note: When the communicator is locked, it may be possible to make a call via the phone to the emergency number programmed into your phone, e.g. 112 or other official emergency number.
System
To unlock the communicator
1 Enter your lock code in the input field. 2 Press OK.
To change the security settings
1 Press Settings in the Security main view. 2 Select the setting and press Change. 3 When you are prompted for a code, enter it and press OK. Choose a new value. Tip: Most of the security features can also be changed in the Security options menu of the phone. See �Settings (Menu 4)� on page 159. The codes are shown as asterisks. If you are changing a code, you will be prompted for the current code and then the new code twice. The code cannot be changed if the corresponding security feature is not in use. For example, if the PIN code request is set to Off, the PIN code cannot be changed. Pressing Close will close the security settings and return to the Security main view.
� 1999 Nokia Mobile Phones. All Rights Reserved.
