8599 N/B Maintenance
4. Disconnect the LCD cable from the system board and detach the antenna. (Figure 2-18) 5. Remove the four screws and put up the LCD assembly, then free the LCD assembly. (Figure 2-19)
Figure 2-18 Disconnect the LCD cable
Figure 2-19 Free the LCD assembly
Reassembly 1. Attach the LCD assembly to the base unit and secure with four screws, then fit the antenna. 2. Reconnect the one cable to the system board, Then replace the wireless cover and secure two screws. 3. Replace the two hinge covers. 4. Replace the keyboard and battery pack. (Refer to sections 2.2.2 and 2.2.1 Reassembly)