8381 N/B Maintenance
4. Remove three screws that secure the keyboard cover and Slightly lift up the keyboard. (Figure 2-4) 5. Disconnect the cable from the system board to detach the keyboard. (Figure 2-5)
Figure 2-4 Remove three screws
Figure 2-5 Disconnect the cable
Reassembly 1. Reconnect the keyboard cable and fit the keyboard back. 2. Replace the keyboard into place with three screws. 3. Replace the keyboard cover into place with one screw. 4. Replace the battery pack. (Refer to section 2.2.1 reassembly)
68
Principal
Derechos © 2024 Owner-Manuals.com.
