|
|
|
Usuarios conectados
Actualmente hay 5697 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
SURFACE COOKING
Yourcooktop is equipped with either pilot ignitionor pilotless ignition. Be sure all surface controls are set in the OFF position prior to supplying gas to the appliance, The cooktopfeaturing conventional surface burners lifts up for easy cleaning of the burner box area. When cool, first remove grates and drip bowls, if equipped. Grasp two front burner wells and lift up.
Pilot Ignition
Pilot ignition uses a standing pilotto light the burner.When the cooktop is first installed, the pilots may be difficult to light due to air in the ( as line. To bleed off air from the line hold a lighted burner and turn knob on. When the burner lights, turn the knob off. To light pilot: Raise match next hold cooktop and to thea lighted match near the pilotports to light the two pilots. Replace cooktop. _'_ _3___ t The sealed burner cooktop is designed with two contour wells to catch and contain spills. Because of this design it is not necessary to lift up the cooktop to clean underneath. To prevent damage to the gas tubing or top, do not attempt to _"_ _'3 .,,,,_
lift or remove the cooktop.
PilotlessIgnition
Pilotlessignition uses a spark from the ignitor to light the burner. There are two ignitorsfor conventionalsurface burner ccoktops, Each sealed burner has its own ignitor which is located on the back side of the burner, REARVIEWOF SEALEDBURNER Burner grates must be properly positioned before cooking. Burner grates are durable but may gradually lose their shine due to usage and high Grates for the porcelain cooktop are place indented sides together so straight sides are at front and rear. temperatures. Grates for the glass cooktop are round. It_n When installing round square grates, square. When installinggrates, position the grate so it fits in the two embossed forms in the porcelain-enamel drip bowl.
_
LI
(__
Ignitor
When cleaning around the sealed surface burner, use care to prevent damage to the spark ignitor. If a cleaning cloth should catch the ignitor, it could damage or break. If the light.ignit°r is damaged or broken, the surface burner will not
CAUTION: Do not operate a surface I on the grate. The porcelain finish onburner withoutthe grate mayachippan I flame.With°ut to absorb the ntense heat from the burner a pan
|
|
|
> |
|
