SHARP 72FF57E
Manual de Servicio

72FF-57E 81FF-57E

DESCRIPTION OF SCHEMATIC DIAGRAM
SAFETY NOTE: 1. DISCONNECT THE AC PLUG FROM THE AC OUTLET BEFORE REPLACING PARTS. 2. SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS OPERATING.
1

616 Vp-p 63.75KHz 2

5.6 Vp-p 31.25KHz

IMPOTANT SAFETY NOTE: PARTS MARKED WITH « ! » ( ) ARE IMPORTANT FOR MAINTAINING THE SAFETY OF THE SET. BE SURE TO REPLACE THESE PARTS WITH SPECIFIED ONES FOR MAINTAINING THE SAFETY AND PERFORMANCE OF THE SET.

3

1.29 Vp-p 31.25KHz 4

2 Vp-p 100Hz

SERVICE PRECAUTION: THE AREA ENCLOSED BY THIS LINE ( ) IS DIRECTLY CONNECTED WITH AC MAINS VOLTAGE. WHEN SERVICING THE AREA, CONNECT AN ISOLATING TRANSFORMER BETWEEN TV RECEIVER AND AC LINE TO ELIMINATE HAZARD OF ELECTRIC SHOCK.

5

67 Vp-p 100Hz 6

NOTE: 1. The unit of resistance «ohm»is omitted (K=1000 ohms. M= Megaohm). 2. All resistors are 1/8 watt. unless otherwise noted. 3. All capacitors are µF, unless otherwise noted (P= µµF). 4. The capacitor with Part No. RC-FZ9XXXBMNJ is designed to with stand 63V.

2 Vp-p 100Hz 7

208 Vp-p 100Hz 8

155 mVp-p 400Hz 9

CAUTION This circuit diagram is original one, therefore there may be light difference from yours.
10

14.5 Vp-p 400Hz
(Audio Out)

WAVEFORM MEASUREMENT CONDITION: Colour bar genetator signal of 70 dB from RF input.

1.1Vp-p 50Hz

23