|
Usuarios conectados
Actualmente hay 5960 visitantes y 3 usuarios online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
For example, when PDLMIN is set to 4 and PDLMAX to 8, the parameter adjustment range will be limited as shown in the illustration below.
7.
Press the [STORE/EXECUTE] key to store the patch.
The module which is assigned to the pedal will automatically be stored as ON.
8.
MAX=8
In play mode, move the pedal while playing your bass.
The parameter assigned to the pedal changes.
MIN=4
9.
Push the pedal fully down.
When PDLMIN is set to 7 and PDLMAX to 2, pushing the pedal decreases the parameter value, and the range is as shown below.
The module which is assigned to the pedal is switched between on and off. If the pedal is assigned to the sampler, the sampler function is switched on or off.
NOTE
If the pedal is assigned to the volume, pushing the pedal fully down does not perform any switching action.
MIN=7
MAX=2
Adjusting the Expression Pedal
The expression pedal is adjusted for optimum operation at the factory, but sometimes, readjustment may be necessary. If pushing the pedal fully down does not have a strong effect, or if the volume or sound changes excessively even when the pedal is only lightly pushed, adjust the pedal as follows.
Other Functions
1.
Turn power to the 708II on while keeping the [PEDAL] key depressed.
The indication "MIN" appears on the display.
2.
With the expression pedal fully raised, press the [STORE/EXECUTE] key.
Push strongly, so that pedal touches here.
When foot is lifted, pedal returns slightly.
The display indication changes to "MAX".
4.
Press the [STORE/EXECUTE] key.
MAX
The adjustment is completed, and the unit returns to the play mode.
HINT
3.
Push the expression pedal fully down and then lift your foot off the pedal.
� The position of the pedal in step 3 determines the on/off switching point. If you want the pedal to perform on/off switching with a lighter touch, set the pedal to a somewhat higher position. � If the indication "ERROR" appears, return to step 2 and repeat the procedure.
The pedal goes back a little.
ZOOM 708II BASS
25
|
|
|
> |
|