SHURE 706 PRO MASTER
Manual de Usuario

Stage Monitor and "House" Sound System (See Setup 3.)
When a "house" system is to be used as the prime sound system, the PRO MASTER can be used as the system mixer, and also provide a monitor output as follows. Patch the MONITOR OUTPUT jack to the EQ INPUT jack. Connect the MIC OUTPUT to the house system low-impedance mic input. Connect the SPEAKER OUTPUTS to the monitor speakers. Adjust the MONITOR controls for the desired monitor speaker level, and the graphic equalizer controls for optimum monitor sound and minimum feedback. Adjust the channel VOLUME and MASTER VOLUME controls for the desired house system level. Note that the monitor is pre-fader and adjustments to the monitor and house systems are independent. If postfader is desired, connect the EFFECTS OUTPUT to the EQ INPUT and adjust the EFFECTSIREVERBand EFFECTS SEND controls for the desired monitor level. Now both the house and monitor systems are controlled by the channel VOLUME controls. Note too that the house system is not affected by the graphic equalizer.
SPEAKER OUTPUTS MONITOR OUTPUT

OUTPUT

TO HOUSE SOUND SYSTEM MIC INPUT

Sound Reinforcement and External Effects Device (See Setup 4.)
Connect the EFFECTS OUTPUT jack to the input of the external effects device (echo, flanger, etc.), and the effects device output to a channel 7 or 8 AUX INPUT jack. The effects-modified signal appears at all PRO MASTER output jacks except the MONITOR OUTPUT
I INPUT
TO CHANNEL 7 OR 8 AUX INPUT OUTPUT

SPEAKER OUTPUTS