WHIRLPOOL 6ED2FHKXRL05
Manual de Usuario

Changing the Light Bulbs
NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. On some models, the dispenser light requires a heavy duty 10-watt bulb. All other lights require a 40-watt bulb. Replacement bulbs are available from your dealer. 1. Unplug refrigerator or disconnect power. 2. Remove light shield when applicable. NOTE: To clean the light shield, wash it with warm water and liquid detergent. Rinse and dry the shield well. 3. Remove light bulb and replace with one of the same size, shape and wattage. 4. Replace light shield when applicable. 5. Plug in refrigerator or reconnect power.

If you choose to turn the refrigerator off before you leave, follow these steps. 1. Remove all food from the refrigerator. 2. If your refrigerator has an automatic ice maker: � Turn off the water supply to the ice maker at least one day ahead of time. When the last load of ice drops, raise the wire shutoff arm to the OFF (up) position. 3. Turn the Thermostat Control (or Refrigerator Control, depending on the model) to OFF. See �Using the Controls.� 4. Clean refrigerator, wipe it, and dry well. 5. Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up. Take care not to damage the door seal with the blocks.
�

Power Interruptions
If the power will be out for 24 hours or less, keep the door or doors closed (depending on your model) to help food stay cold and frozen. If the power will be out for more than 24 hours, do one of the following: � Remove all frozen food and store it in a frozen food locker.
�

Moving
When you are moving your refrigerator to a new home, follow these steps to prepare it for the move. 1. If your refrigerator has an automatic ice maker: � Turn off the water supply to the ice maker at least one day ahead of time. � Disconnect the water line from the back of the refrigerator.
�

Place 2 lbs (907 g) of dry ice in the freezer for every cubic foot (28 L) of freezer space. This will keep the food frozen for 2 to 4 days. If neither a food locker nor dry ice is available, consume or can perishable food at once.

�

2. 3. 4. 5.

REMEMBER: A full freezer stays cold longer than a partially filled one. A freezer full of meat stays cold longer than a freezer full of baked goods. If you see that food contains ice crystals, it may be refrozen, although the quality and flavor may be affected. If the condition of the food is poor, dispose of it.

When the last load of ice drops, raise the wire shutoff arm to the OFF (up) position. Remove all food from the refrigerator and pack all frozen food in dry ice. Turn the Thermostat Control (or Refrigerator Control, depending on the model) to OFF. See �Using the Controls.� Unplug the refrigerator. Empty water from the defrost pan located behind the base grille.

Holiday and Moving Care
Holidays
If you choose to leave the refrigerator on while you�re away, use these steps to prepare your refrigerator before you leave. 1. Use up any perishables and freeze other items. 2. If your refrigerator has an automatic ice maker: � Raise wire shutoff arm to OFF (up) position.
�

Shut off water supply to the ice maker.

6. Clean, wipe, and dry thoroughly. 7. Take out all removable parts, wrap them well, and tape them together so they don�t shift and rattle during the move. 8. For models with leveling legs, adjust the rollers to raise the front of the refrigerator so it rolls more easily. See �Adjust the Doors.� 9. Tape the doors shut and tape the power cord to the refrigerator cabinet. When you get to your new home, put everything back and refer to �Installation Instructions� for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator.

3. Empty the ice bin.

13