TOSHIBA 67Z24B
Manual de Usuario

ADDITIONAL FEATURES

The timer, time display, input selection
The Timer
You can tell the TV to turn itself ON or OFF after a certain time.

The Time Display
The time display facility allows you to see the current time on the TV screen. If you press the button on the remote control whilst watching a normal TV broadcast, you will see a time display from the broadcaster. It will remain on the screen for about 5 seconds.

1

Select the TIMER option from the top menu bar.

t

TIMER
Off timer On timer 0-9 EXIT : To set : To exit 00:00 01:30 P02

Input Selection
Most video recorders and Set Top Box receivers send a signal through the Scart lead to switch the TV to the correct Input socket. Alternatively, you may select it with the external source selection button on the remote control if the TV does not switch over automatically.

2

Select the On timer (or the Off timer). If, for example, you want the TV to turn ON (or OFF) in one and a half hours time, enter 01:30 using the numbered buttons on the remote control. When setting the On timer, you must enter the programme position number you want to watch. You must put the set into Standby mode by pressing the button.

1

3

Press the button to bring up EXT1 on the screen. This will display the signal coming in through Scart 1. Press the button again to select the equipment connected to Scart 2 (EXT2). And press the button again for EXT3 ( (3) on the front of the TV).

B B

i

2 3 4

Any equipment connected with Scart leads must also be put into Standby mode to prevent them being displayed when the timer switches on. When the On timer has been set, the GREEN On timer indicator on the front of the TV will be lit (see page 5).
If the On timer has been set, you do not have to wait to watch the television . You can bring the set back to life by pressing the button. However, the GREEN timer light will stay on until the set time period has passed, at which point the TV will go to the chosen channe l.

B

B

To return to TV mode, simply press one of the numbered buttons on the remote control. To view the connected equipment once again, press the button again.

B



i

An S after EX T2 i.e. E X T 2 S, in dicates the input is se t fo S-Video signa r an l, see page 20.

4

To cancel the On timer, enter zero in each position.

When the Off timer is set and there is one minute left before the TV will turn off a reminder will show on sc reen e.g. Off timer / 59 means there are 59 seconds left. To turn the TV back on, press the on the remote control.

i or a number button

14