3. How to Eject Manually
1. Remove the Rear Cabinet. 2. To remove the Loader PCB Holder with the DVD Main CBA Unit, remove three screws (S-7) in Fig. D2. Do not disconnect connectors. 3. To remove the Chassis Cover, remove 4 screws A as shown in Fig. D5. 4. Remove a disc.
Chassis Cover
Disc
Screws A
Fig. D5
Reassembly note of the Chassis Cover: 1. Insert the pin A on the Chassis Cover into the hole A on the Main Chassis as shown in Fig. D6.
Chassis Cover
Pin A
Hole A
Main Chassis
Fig. D6
2. Tighten 4 screws A as shown in Fig. D5.
