Start » Vertical correction adjustment of the green line
� Select the Adjustment item
GV - STATIC
� Adjust the Data value
Note : � Repeat the adjustments until you attain the optimum state. � Fine-adjust over the entire picture to obtain the optimum picture. � If the adjustment of V-STATIC is not possible within the range of 010 to �010, set the data value to 0, turn the centering magnet of the deflection yoke and fine-adjust V-STATIC. Screen No. Adjustment Method � Adjust the center horizontal line to the center of the screen.
or
or
In particular, be aware of the setting before adjustment.
� Adjust so that the green vertical line at the center becomes a straight line with neither distortion nor tilting.
(GV-4D BOW)
"
(GV-5D SKEW)
"
Note: Do not adjust items 6 and 7.
(GV-6D BOW)
"
1 2 3
Line-interval Center-line Adjustment
GV-SIZE GV-LIN
" "
� Adjust so that the intervals of the green horizontal lines at the top and bottom of the screen are symmetrical and correct.
GV-MID SIZE
"
4 5 6
GV-MID LIN
"
(GV-5D SIZE) (GV-6D LIN)
"
Note: Do not adjust items 5 and 6.
� Screen
� STATIC
1
Key No.
» Screen�s changes in the vertical direction when manual convergence adjustment is mode The changes at the arrow parts shown below are those implemented using the Volume ± key. Changes are opposite to the arrow when the Volume � key is used.