Film Advance and Unloading Exposed Film
Film Advance Unloading Exposed Film * Move the empty spool from the top to the lower (take-up) compartment, ready for loading the next film roll. *Never load, unload or handle film in direct sunlight.
1. Giving the Film Advance Crank one complete turn, will cock the shutter and mirror and ready the camera for the next exposure. 2. When the film is completely exposed (15 exposures on 120, 30 on 220 film), the crank stop will disengage. Continue turning until the paper trailer is completely wound onto the take-up spool. (About five turns after the last exposure.)
3. Open the Back Cover, and remove the Roll Film Insert. The Exposure Counter will return to S (start) automatically. 4. Pull the Spool Clip on the roll film insert out to remove the film. 5. Remove the film from the roll film insert; make sure that the film on the roll does not loosen, and seal immediately.
