MITAC 6120N
Manual de Servicio

6120N N/B MAINTENANCE
Reassembly

1. Align the beveled corner of the CPU with the beveled corner of the socket and insert the CPU pins into the holes. Insert a minus screwdriver to the CLOSE (lower) side of the socket and push the screwdriver toward the CPU to secure the CPU in place. CAUTION: The maximum force for insertion of the CPU should not exceed

100 lbs (45.5 kg).

Figure 5-16. Insertion the CPU

2. Place the fan assembly on top of the CPU. Plug in the power cord and secure the fan assembly with four screws. (Refer to Figure 5-14 earlier.) 3. Replace the CPU compartment cover and secure with two screws.

-41-