SHURE 596T
Manual de Usuario

Model 596T User Guide
CONNECTIONS
The internal wiring, circuitry, and switch connections of the 596T are shown in Figure 1.

HANG-UP BUTTON

BLUE

PTT/BLK
PTT/RED
W6 S1 W1

5

6 4 3 1
OUT/WHT W2 C4 .001uF

2
PTT
R2 33K R1 300 C1 .1uF
Q1

W3 GND/ SHIELD

R3 6.2K

C2 C3 .001uF 120pF

C5 120pF

TRANSISTORIZED DYNAMIC HAND-HELD MICROPHONE
GENERAL The Shure Model 596T is an amplified, dynamic, hand-held microphone designed for rugged and reliable operation in a variety of mobile and fixed-station communications applications. The 596T has an omnidirectional pickup pattern and provides highly intelligible speech communication in police, fire, taxi, bus, utility, forestry, transportation, industrial, radio-telephone, amateur radio and similar applications. In addition to a clear, crisp, natural voice response, the 596T offers extremely low sensitivity to hum pickup. The unit fits naturally and comfortably in the hand and is not affected by heat or humidity. The exclusive ARMO-DURâ case is immune to oil, grease, fumes, salt spray, sun, rust and corrosionand is outstanding in its ability to withstand mechanical shocks and vibration. Features � Built-in transistor amplifier (fed by dynamic microphone) � Frequency response from 300 to 5,000 Hz, tailored for voice communications use � Low sensitivity to hum pickup � High-impact ARMO-DURâ case is lighter and stronger than die-cast metal, comfortable to the touch in hot or cold weather � Rugged and dependable under all operating conditions�Long-life Neoprene-jacketed coil cord � Silver-plated switch contacts for long-term low contact resistance and reliable performance

MK1

W8

INTERNAL CONNECTIONS FIGURE 1

RADIO INPUTS
The 596T is designed to operate with two-way radio sets with an audio input circuit similar to that shown in Figure 2.

560 FROM MIC OUT/WHT

1K 9.6 VDC

15 F

GND/SHIELD

STANDARD TEST CIRCUIT FIGURE 2

SPECIFICATIONS Test Conditions: (unless otherwise specified) Audio output between White and Shield (Ground) PTT switch depressed Measured with High Z DMM Standard test circuit as shown in Figure 2
Type Dynamic (with transistor preamplifier)

©2003 Shure Incorporated 27B3023 (Rev. 4)

Printed in U.S.A.