Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside.
2.
STOP! Allow the lamp to cool for at least one (1) hour before replacing it.
6. 3. On the back of the TV, loosen the thumb screw (by hand) on the lamp unit door, and then remove the lamp unit door.
Carefully insert the new lamp unit straight into the TV until it is fully seated.
Note : Never subject the lamp unit to excessive shock. Never touch the lamp unit glass or otherwise get it dirty. Doing so may affect the image quality and reduce the service life of the lamp. See �Cleaning the lamp unit glass� below. 7. Using a manual screwdriver, tighten two lamp unit screws. Note:Hand-tighten only. Do not use an electric screwdriver.
4.
Using a manual screwdriver, loosen two screws on the lamp unit.
