WHIRLPOOL 3PACH16DD0
Manual de Usuario

To modify the temperature: l Press the WARMER Button to raise the temperature of the room.

l

Press the COOLER Button to lower the temperature of the room.

NOTE: Each press alters the temperature approximately 1�C. To deactivate the HEAT ONLY Cycle: You can deactivate the HEAT ONLY Cycle two ways: l Press the OFF Button. OR l Activate another cycle (for example: AUTO COOL).

Using

the DRY ONLY

Cycle

The DRY ONLY Cycle allows your air conditioner to operate as a dehumidifier. It removes excess moisture from the room air without providing much cooling. The cycle is preset to operate most efficiently at LOW fan speed. To activate the DRY ONLY Cycle: l Press the DRY ONLY Button. NOTE: When the cycle is active, the indicator light on the DRY ONLY Button will be lit. To modify the fan speed: l Press the FAN SPEED Button. NOTE: Each press advances the fan speed: LOW --) HI --) MED + LOW To deactivate the DRY ONLY Cycle: You can deactivate the DRY ONLY Cycle two ways: l Press the OFF Button. OR l Activate another cycle (for example: AUTO COOL).

0

FAN SPEED