|
Usuarios conectados
Actualmente hay 5981 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
PROGRAMMING CHANNEL MEMORY
Auto tuning
Before using Auto tune it is important that you select your desired system i.e. B/G for Continental Europe, D/K for Eastern Europe, I for the U. K., L1 (12) and L2 (8) for France. Should you also wish to tune to alternative systems this must be done manually, after using Auto tune.
Manual tuning
1 2
Press the MENU button and press the > (or <) button to select the SET UP menu.
Press the TUNING.
(or
) button to highlight MANUAL
1 2
Press the MENU button and press the > (or <) button to select the SET UP menu.
Press the > button to select the MANUAL TUNING menu and ENTER button.
3
Press the > button to select the AUTO TUNING display. Press the (or ) button to highlight START.
Press the > (or <) button to select SEARCH. Press the button to search up the band (>>>) or the button to search down the band (<<<). The SEARCH will flash and the TV will show the channel numbers whilst the TV is searching. When a station/satellite is found it will be displayed.
3
Press the ING.
(or
) button to highlight AUTO TUN-
Press the > (or <) button to select the required SYSTEM. i.e. B/G, D/K, I, L1 (12) and L2 (8).
4
Press the > (or <) button to select the PROGRAMME NO. Press the (or ) button to select the program position number required. Press the ENTER button if you wish to store the broadcast displayed (ENTER: TO STORE will highlight momentarily) or repeat from step 3 if you wish to continue searching. The display will stay on screen for approx. 60 seconds. If you do not STORE the program position it will not be held in memory. Repeat the procedure for all the remaining program positions you wish to tune, including the satellite. Press the EXIT button to exit when you have finished. SPECIFIC INFORMATIONS GENERAL ADJUSTMENTS
4
Press the > button to start the automatic search. DO NOT PRESS ANY BUTTONS WHILST THE AUTOMATIC SEARCH IS IN PROGRESS. If you make a mistake simply repeat steps 3 and 4 to start again from the beginning. Each station will be displayed along with a station identifier, if available. Allow the television to complete the search. To tune any stations on different systems, choose the system you want, then use Manual tune for all the extra stations you require.
� 17 �
|
|
|
> |
|