This feature allows you to include an imprint of the date and time in the picture. Do this by using the MODE, SELECT and SET buttons located on the film compartment cover. Use the tip of a ballpoint pen to depress the buttons.
No Imprint in Picture
Month, Day and Year
Day, Month and Year
Choosing the mode Choose the MODE by repeatedly pressing the MODE button until you reach the desired format. Each time this button is pressed, the format sequence will change as shown at left.
Year, Month and Day
Day and Time
Example: Setting the Year, Month and Day
To set the Year: 1. Press the SELECT button until the Year (YY) blinks. 2. Press SET repeatedly until you reach the desired Year.
To set the Month: 1. Press the SELECT button until the Month (MM) blinks. 2. Press SET repeatedly until you reach the desired Month.
To set the Day: 1. Press the SELECT button until the Day (DD) blinks. 2. Press SET repeatedly until you reach the desired Day.
Note: One 3 V lithium battery (CR2025) powers the display. If the display becomes too dim to read, the battery should be replaced.
