PHILIPS 32PW8760/05
Manual de Usuario

Quick installation
The first time you switch on the television, a menu appears on the screen and the tuning starts automatically. Main � Install � This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears. To exit or interrupt the search, press H. If no program is found, consult the possible solutions p. 12. & If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete. é If this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the <> keys and validate with .

Auto Store �

Searching Please Wait

Prog. found 3 525,25 MHz

If the menu is not displayed, press and hold down the �- and �+ keys on the TV set for 5 seconds to start the tuning (or MENU key depending on versions). All the available TV programs will be stored.

Program sort
& Press key H.The Main menu is displayed on the screen. Main � Install � Language � Country � 00 Auto Store � 01 BBC1 Manuel Store � 02 BBC2
Program � Name �

é With the cursor, select the Install menu followed by the Sort menu. � Select the programme you want to move using the <> cursor and press . � Then use the <> cursor to select the new number and validate with . ( Repeat steps � and � for each program you wish to renumber. § To quit the menus, press d.

Sort �

03 � CH4 04 ANGLI 05 CH5

Program name
If required, you can give a name to the programmes and external connectors. Note : on installation, the programs are named automatically when an identification signal is sent. & Press the H key. é With the cursor, select the Install menu, then � Use the @ P # keys to select the programme to name or rename. � Use the cursor to move around the name display area (5 characters) and the <> cursor to select the characters. ( When the name has been entered, use the H cursor to exit.The name is stored. § Repeat steps � to ( for each programme you wish to name. è To quit the menus, press d.

Name.

4