|
Usuarios conectados
Actualmente hay 5884 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
14
MAINTENAN(;E
Protect the oven bottom against excessive spillovers, especially acid or sugaryspillovers, as they may discolor the porcelain. Use the correct size cooking utensil to avoid boilovers. Never place utensils or aluminum foil directly on the oven bottom,
Ranges that are dot equipped with a lower broiling compartment will have a panel in place of the broiler door. This panel must be removed to access the rating plate located on the lower range front frame. The rating plate contains the model and serial numbers for your appliance. To remove panel: Grasp the bottom corners of the panel. To replace panel: Align the four slots on the panel with the
2 _1'_ <_ ____3_3 ___,,_J
and push down untilthe panel snaps into place. four screws panel range away from Then lower Then lift the on the up andfront frame. the range. the panel Appliances which require electrical power are equipped with a three-prong grounding plug which must be plugged directly into a properly grounded three-hole 120 volt electrical outlet.
To remove: When cool, remove the oven racks. Slide the two catches, located at each rear corner of the oven bottom, toward the front of the oven. Lift the rear edge of the oven bottom slightly.Then slide it back untilthe front edge of the oven bottom clears the oven front frame. Remove the oven To replace: Fit the front edge of the oven bottom into the front frame. Lowerthe rear of the oven bottom and slidethe two catches back to lock the oven bottom into place. bottomfrom the oven.
_F,_b _
/
t
Always disconnect power to appliance before servicing. Before replacingthe light bulb, DISCONNECT POWER TO THE RANGE. Be sure the bulb is cool. Do not touch a hot bulb with a damp cloth as the bulb may break, To turn on oven light: Pushinthe rockerswitchlocatedon the backguard. To replace oven light: Be surethe bulbis cool.Use a dry potholder,to prevent possible harm to hands, and very carefullyunscrewbulb. The three-prong grounding plug offers protection against shock hazards. DO NOT CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD PLUG. If an ungrounded, wo-hole or othertypeelectricaloutletis t encountered, it is the personal responsibility of the appliance owner to have the outlet replaced with a properly grounded three-hole electrical outlet.
Replace with a 40 watt appliance bulb and reconnect power to the range. Reset the clock.
|
|
|
> |
|