TOSHIBA 28W27B
Manual de Usuario

and stored the TV signals. See Tuning, Search and Store TV channels. Store the test signal under programme number 0. � Replace the aerial cable in the aerial socket �ANT.� of your video recorder once you have stored the test signal.

Connecting Headphones
Use the stereo headphone socket (HP) on the lower right side of your TV, to connect headphones.

Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer

Camera and Camcorder To connect to Front-AV input (F-AV):
Connect your camera or camcorder at the front side of your TV. � Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same colour.

Poor Picture
Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc. ? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.

Back-AV output:
Connect your camera or camcorder at the back side of your TV. � Connect your equipment to the TV via VIDEO, AUDIO R and AUDIO L inputs. You should connect the jacks to the input in the same colour. Back AV output outputs only the information coming from the ANT. (aerial) socket, so you can not output external sources from Back AV output.

SVHS (via EXT.2)
If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better picture quality by selecting SVHS mode and connecting your equipment to the EXT.2 terminal of TV. See your equipment's booklet to check if your equipment has such feature.

No Picture
Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving any transmission. Have you pressed the correct keys on the remote control? Try once more.

Connect the decoder to the video recorder
Some video recorders have a special euroconnector for decoder. � Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder. See also the handbook of your video recorder. � To connect your video recorder to the TV, see TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer.

Sound
You can not hear any sound. Did you perhaps interrupt the sound, pressing � � key? Are external speakers connected to the TV? Sound is coming from only one of the speakers. Is the balance set to one direction extreme? See SOUND menu.

ENGLISH - 20 -