ELECTRICAL ADJUSTMENTS
2-2: CONTRAST MAX 1. Receive the monoscope pattern. (RF Input) 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 2-1 and press the channel button (35) on the remote control to select "CONTRAST MAX". 4. Press the LEFT/RIGHT button on the remote control until the contrast step No. becomes "46" 5. Check if the picture is normal. 6. Receive the monoscope pattern. (VIDEO Input) 7. Press the INPUT SELECT button on the remote control to set to the AV mode. 8. Using the remote control, set the brightness and contrast to normal position. 9. Activate the adjustment mode display of Fig. 2-1 and press the channel button (35) on the remote control to select "CONTRAST MAX". 10. Press the LEFT/RIGHT button on the remote control until the contrast step No. becomes "46". 11. Check if the picture is normal. 12. Playback the DVD(480i) disc. (COMPONENT Input) 13. Press the INPUT SELECT button on the remote control to set to the COMPONENT mode. 14. Using the remote control, set the brightness and contrast to normal position. 15. Activate the adjustment mode display of Fig. 2-1 and press the channel button (35) on the remote control to select "CONTRAST MAX". 16. Press the LEFT/RIGHT button on the remote control until the contrast step No. becomes "49". 17. Playback the DVD(480i) disc. (HDMI Input) 18. Press the INPUT SELECT button on the remote control to set to the HDMI mode. 19. Using the remote control, set the brightness and contrast to normal position. 20. Activate the adjustment mode display of Fig. 2-1 and press the channel button (35) on the remote control to select "CONTRAST MAX". 21. Press the LEFT/RIGHT button on the remote control until the contrast step No. becomes "49". 22. Check if the picture is normal.
