HUSQVARNA 223L
Manual de Usuario

SAFETY INSTRUCTIONS
Cutting equipment
This section describes how through correct maintenance and through using the right type of cutting equipment you can: � Reduce the machine�s tendency to kickback � Obtain maximum cutting capacity. � Increase the service life of the cutting equipment. The three basic rules: 1)Only use the cutting and guard equipment we recommend! See chapter �Technical data�.
IMPORTANT INFORMATION

EN

The section describes how through correct maintenance and through using the right type of cutting equipment you can reduce the machine�s tendency to kickback, obtain maximum clearing capacity and increase the service life of the cutting equipment. � Only use the cutting and guard equipment we recommend! See chapter �Technical data�. Refer to the instructions for the cutting equipment for the correct winding of cord and for the selection of the right cord diameter. Keep the blade�s teeth well and correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.

�

�

2)Keep the blade�s teeth well and correctly sharpened! Follow our instructions and use the recommended filing gauge. An incorrectly sharpened or damaged blade increases the risk of an accident.

!

WARNING! Incorrect cutting equipment or an incorrectly sharpened blade increases the risk of kickback.

Filing the grass blade
� See the cutting equipment�s packaging for correct filing instructions.

3)Check the cutting equipment with regard to damage and crack formation. Damaged cutting equipment should always be replaced.

� The blades are sharpened using a single cut flat file.

� Sharpen all edges equally to maintain the balance of the blade.

English �

3